●   DIRP analysis function with graphic display of results

●    Multi signal OUTPUT port for sine and square wave signals

●    Separate POWER PORT for accessories like magnetic coils or lamps

●    Dial for individual settings of square wave amplitudes

●    Selectable automatic adjustment of square wave amplitudes based on frequency values

●    Memory capacity for 50 data blocks of up to 50 frequency values with assigned  

      parameters each -  plus, if chosen, the results of a DIRP analysis. The data is stored until

      an overwrite.

●    Special functions selectable: SENSITIVITY, WOBBLE, PULSE, SWEEP, Sweep To

       Next

●    Input of frequency range and step sizes for DIRP and SWEEP

●    Operating range for SINE WAVE SIGNALS 0.01 Hz to 15.000.000 Hz

●    Operating range for SQUARE WAVE SIGNALS 0.01 Hz to 3.000.000 Hz

●    Individual TIMER for each frequency in a sequence available

●    Integrated library functions with more than 580 entries

●    The signal amplitude is switched OFF and ON again between successive frequencies

      (soft ramping)

●    Signal delivery from the OUTPUT port can be visually controlled with an LED

Multi signal OUTPUT port: All signal forms are delivered to one OUTPUT port. The device toggles automatically between SINE- and SQUARE wave forms based on frequency values: Below 65.000 Hz square waves, above sine waves. The user can override the automatic feature and assign either one of the wave forms available to each frequency value.

Touch screen and ease of use: The touch screen displays housing tilts to a comfortable viewing angle. If one of the three main menus is touched on the opening screen, the functions and settings offered are easily identified and the settings adjusted to the users need. Defaults set at the factory support standard applications reducing the setup time of the device.